OAuth 2.0

Allegro lets your service sign a member in through Allegro and receive that member's session token — the same RS256 JWT the browser SDK uses to act as the member. This is the flow to reach for when you run your own application (a mobile app, a companion site, a partner portal) and want "Sign in with Allegro" without building your own login for the tenant's audience.

Allegro implements the standard OAuth 2.0 Authorization Code flow, with PKCE supported and strongly recommended. PKCE is optional by default; a tenant can require it for your client (see PKCE). The member authenticates on an Allegro-hosted page, which emails a sign-in link and a one-time code in the same message — the member can either click the link or type the code back into the page — alongside any social providers the tenant has enabled. Your backend then exchanges a short-lived code for the member's JWT.

Why both a link and a code

A member who opens the emailed link in a different browser than the one holding the authorization request would otherwise be stranded, because the request lives in the original tab. Offering the one-time code gives them a way to finish in the tab they started in.

The token never travels through the browser

Only a short-lived, single-use authorization code passes through the redirect URL, and that code is useless without your client secret (and your PKCE verifier when PKCE is in use). The JWT itself is only ever returned to your backend over a direct server-to-server request.

Before you begin

A tenant administrator registers an OAuth client for you from the tenant's admin settings and gives you:

Value	Description
client_id	Public identifier for your integration. Safe to include in browser redirects.
client_secret	Secret shown once at creation. Store it securely on your backend; it is never exposed in the browser.
Redirect URI(s)	The exact URLs Allegro is allowed to send the member back to.
Allowed origins	The exact browser origins allowed to call the session probe. Only needed for silent sign-in.

Redirect URIs are matched exactly — no wildcards, no trailing-slash flexibility, no query-string variance. Each URI you use must be registered with the client ahead of time and must be HTTPS (except http://localhost and http://127.0.0.1 during local development).

A tenant administrator can edit a client after creation — updating its redirect URIs, renaming it, enabling or disabling it, and toggling whether PKCE is required — from the tenant's OAuth client settings. The client secret is not editable; it can only be regenerated (which invalidates the previous secret).

Everything below happens against the tenant's custom domain, for example https://members.acme.com, or a property's custom domain when you sign members in to a specific property. OAuth is only available once a custom domain is set up; the acme.allegrocdp.com platform hostnames don't serve it. You can confirm the endpoints programmatically from the discovery documents, and you should — see Custom domain and issuer.

If your integration also needs to know whether a visitor is already signed in — without sending them through the sign-in page — see Silent sign-in.

The flow

Your app / backend            Member's browser              Allegro (tenant domain)
     │                              │                               │
     │  1. redirect to authorize    │                               │
     │─────────────────────────────>│  GET /oauth/authorize         │
     │                              │──────────────────────────────>│  validate client_id
     │                              │  2. member signs in            │  + redirect_uri
     │                              │<───────── login page ──────────│
     │                              │                               │
     │                              │  3. redirect back with code    │
     │  redirect_uri?code=&state=   │<──────────────────────────────│
     │<─────────────────────────────│                               │
     │                              │                               │
     │  4. POST /oauth/token  (server-to-server, no browser)         │
     │───────────────────────────────────────────────────────────────>│  verify secret,
     │                                                               │  code + PKCE
     │  5. { access_token: <member JWT>, token_type, expires_in }    │
     │<───────────────────────────────────────────────────────────────│

Step 1 — Redirect the member to the authorize endpoint

GET https://<your-tenant-domain>/oauth/authorize

Generate a random state value and store it so you can verify it when the member returns. If you are using PKCE — recommended, and required when the tenant has enabled it for your client — generate the code verifier and challenge first; see PKCE.

Send the member's browser to the authorize endpoint with the following query parameters:

Parameter	Required	Description
client_id	Yes	Your client identifier.
redirect_uri	Yes	One of your registered redirect URIs. Matched exactly.
response_type	Yes	Must be code.
code_challenge	If enabled	The PKCE challenge (see PKCE). Required unless PKCE is disabled for your client.
code_challenge_method	If enabled	Must be S256 when code_challenge is present.
state	No	An opaque value round-tripped back to you unchanged. Use it for CSRF protection.
scope	No	Reserved for future use.
provider	No	A login provider slug, such as google. Skips the sign-in page and sends the member straight to that provider. See Skipping the sign-in page.
login_hint	No	The member's email address, if you already know it. Prefills the email field on the sign-in page. Ignored if it is not a valid email address.

const params = new URLSearchParams({
    client_id: CLIENT_ID,
    redirect_uri: 'https://your-app.example.com/callback',
    response_type: 'code',
    // Include code_challenge / code_challenge_method only when using PKCE.
    code_challenge: codeChallenge,
    code_challenge_method: 'S256',
    state,
});

const authorizeUrl = `https://<your-tenant-domain>/oauth/authorize?${params}`;
// Redirect the member's browser to authorizeUrl.

Allegro renders a sign-in page hosting the tenant's configured login methods. If the member already has a valid session on the tenant domain, they see a "Continue as {email}" prompt instead. Either way the member takes one explicit action, after which Allegro redirects the browser back to your redirect_uri.

Skipping the sign-in page

If your app shows its own "Sign in with Google" button, send provider=google and Allegro redirects the member to Google without rendering its own page. After Google, the member comes back to Allegro and on to your redirect_uri without a further click. This uses full-page redirects throughout, so it works where popups are unreliable, such as in-app browsers on iOS.

provider is a hint, not a requirement. Allegro shows its usual sign-in page instead when the provider is unknown or not enabled for the tenant, and shows the "Continue as {email}" prompt when the member is already signed in. It has no effect with prompt=none.

Invalid requests never redirect

If the client_id is unknown or disabled, or the redirect_uri is not on the client's allowlist, Allegro renders an error page and does not redirect. This is deliberate — it prevents an attacker from using a malformed request to bounce a code to an unapproved destination. Double-check that the exact redirect URI you send is registered.

Step 2 — Handle the redirect back

Once the member authenticates, Allegro redirects the browser to:

https://your-app.example.com/callback?code=<authorization-code>&state=<state>

Verify that state matches the value you generated in step 1, then take the code. The code is single-use and expires 10 minutes after it is issued. Exchange it as soon as the member lands on your callback; nothing is gained by holding it.

Step 3 — Exchange the code for a token

From your backend (never the browser — this request carries your client secret), POST to the token endpoint:

POST https://<your-tenant-domain>/oauth/token
Content-Type: application/x-www-form-urlencoded

Parameter	Required	Description
grant_type	Yes	Must be authorization_code.
code	Yes	The authorization code from step 2.
redirect_uri	Yes	The same redirect URI used in step 1. Matched exactly.
client_id	Yes	Your client identifier.
client_secret	Yes	Your client secret.
code_verifier	If enabled	The PKCE verifier (see PKCE). Required whenever you sent a code_challenge in step 1.

Credentials go in the form body

The only supported client authentication method is client_secret_post: send client_id and client_secret as form fields. An HTTP Authorization: Basic header is not read, so a library configured for client_secret_basic will fail with invalid_client.

curl https://<your-tenant-domain>/oauth/token \
  -d grant_type=authorization_code \
  -d code="<authorization-code>" \
  -d redirect_uri="https://your-app.example.com/callback" \
  -d client_id="<your-client-id>" \
  -d client_secret="<your-client-secret>" \
  -d code_verifier="<your-code-verifier>"

On success you receive the member's JWT:

{
    "access_token": "<member-jwt>",
    "token_type": "Bearer",
    "expires_in": 31536000
}

Field	Description
access_token	The member's RS256 JWT. Use it as a Bearer token.
token_type	Always Bearer.
expires_in	Token lifetime in seconds.

Those three fields are the whole response. There is no refresh_token and no id_token — start a new authorization request when the token expires, and read the member's identity from the JWT's own claims.

The token represents a fresh, independent session minted for your integration. It appears among the member's sessions and can be revoked without affecting the member's own browser session. The token also carries an azp (authorized party) claim set to your client_id, so a partner-issued token is distinguishable from a browser SDK session token.

Step 4 — Use the token

The access_token is a standard Allegro member JWT. Send it as a bearer token to the Browser SDK API, or verify it yourself against the tenant's public keys. See the JWT Verification guide for the token structure, the JWKS endpoint, and verification examples.

What a partner token cannot do

A token carrying azp acts as the member but may not manage the session it rides on. Two Session API endpoints refuse it:

Endpoint	Why it is refused
DELETE /api/session	Signing out would end the member's own session on the tenant, not just your integration.
POST /api/session/refresh	The re-minted token would drop azp, turning a partner token into a first-party one.

Both answer 403 with the error code PARTNER_TOKEN_NOT_PERMITTED:

{
    "data": {
        "message": "This endpoint cannot be called with a partner-issued token.",
        "code": "PARTNER_TOKEN_NOT_PERMITTED"
    },
    "status": 403
}

Every other endpoint that hands you back a JWT — form submission, setting a user attribute — re-mints it with azp intact, so a partner token stays a partner token for its whole life. Get a new token by running the authorization flow again.

Discovery

Allegro advertises its endpoints in two discovery documents, so OAuth-aware libraries can configure themselves automatically:

Document	Specification
/.well-known/openid-configuration	OpenID Connect Discovery 1.0
/.well-known/oauth-authorization-server	RFC 8414, OAuth 2.0 Authorization Server Metadata

Fetch whichever one your library reaches for. They are generated from the same source and agree on every field except subject_types_supported, which only the OpenID document carries.

GET https://<your-tenant-domain>/.well-known/oauth-authorization-server

{
    "issuer": "https://<your-tenant-domain>",
    "authorization_endpoint": "https://<your-tenant-domain>/oauth/authorize",
    "token_endpoint": "https://<your-tenant-domain>/oauth/token",
    "jwks_uri": "https://<your-tenant-domain>/.well-known/jwks.json",
    "response_types_supported": ["code"],
    "grant_types_supported": ["authorization_code"],
    "token_endpoint_auth_methods_supported": ["client_secret_post"],
    "code_challenge_methods_supported": ["S256"],
    "prompt_values_supported": ["none"]
}

Both documents are cacheable for a day (Cache-Control: public, max-age=86400).

Every value is claimed on behalf of something the server really implements. response_types_supported is ["code"] alone: the implicit flow is not supported, and response_type=token is rejected. prompt_values_supported is ["none"], covered in Silent sign-in.

note

No id_token is issued, and no signing algorithm is advertised

Allegro is an OAuth 2.0 authorization server that serves the OpenID discovery document for the convenience of clients that look there first. It issues no id_token, so both documents deliberately omit id_token_signing_alg_values_supported even though OpenID Connect Discovery lists that field as required. A strict OIDC client library may reject the document for that reason; treat Allegro as a plain OAuth 2.0 server and read the member's identity from the access token instead. The algorithm behind the tokens Allegro does issue is discoverable from the alg on each key at /.well-known/jwks.json — see the JWT Verification guide.

Custom domain and issuer

OAuth runs only on a custom domain: the tenant's, or a property's when you sign members in to that property. That domain serves the OAuth and discovery endpoints, and it is the issuer in both discovery documents and the iss and aud claims in every token Allegro issues, which is what lets a client verify a token against the document it discovered.

The platform hostnames (acme.allegrocdp.com and the per-property acme--news.allegrocdp.com) don't serve audience OAuth at all. Every OAuth and discovery path answers 404 there, except /.well-known/jwks.json.

The key set is the exception: it names no host, so it is served everywhere, including the platform hostnames.

The issuer changes when a tenant's custom domain changes

If you pin iss when verifying tokens, a tenant that adds, changes, or removes its custom domain changes the value you are pinning, and every token verification starts failing. Operators should tell integrators before making that change; on your side, prefer reading issuer from discovery over hard-coding it.

Errors

The token endpoint returns a 400 response with an OAuth-style error code:

Error	Cause
invalid_client	The client_id is unknown or disabled, or the client_secret is wrong.
invalid_grant	The code is unknown, expired, or already used; the redirect_uri does not match the one bound to the code; or the code_verifier fails PKCE validation.

{ "error": "invalid_grant" }

Because codes are single-use and short-lived, a retried or double-submitted exchange returns invalid_grant. Start a new authorization request if that happens. Two concurrent exchanges of the same code are resolved the same way: exactly one gets a token and the other gets invalid_grant.

The authorize endpoint reports its errors differently. Once the client_id and redirect_uri are known-good, a malformed request is reported back to your callback as a query parameter, echoing state:

https://your-app.example.com/callback?error=invalid_request&state=<state>

Error	Cause
invalid_request	An unsupported prompt value, or a missing code_challenge on a client that requires PKCE.
login_required	A prompt=none request on a browser with no signed-in session. See Silent sign-in.

An unknown or disabled client_id, or a redirect_uri that is not registered, never redirects at all — see the warning in step 1.

PKCE

PKCE (S256) is strongly recommended. It is optional by default; a tenant administrator can require it for an individual client from the client's settings. Leaving it optional accommodates a server-side integration that authenticates with its client secret and cannot generate a verifier. Regardless of the requirement, if you send a code_challenge it is always enforced at the token endpoint (you cannot start a PKCE-protected flow and then drop the verifier), so we recommend using PKCE whenever your integration can.

When you use PKCE, generate a random code verifier and derive its code challenge before you redirect the member in step 1.

• The verifier is a random string between 43 and 128 characters.
• The challenge is the base64url-encoded SHA-256 hash of the verifier, with padding removed. The S256 method is required.

import crypto from 'node:crypto';

const base64url = (buffer) =>
    buffer
        .toString('base64')
        .replace(/\+/g, '-')
        .replace(/\//g, '_')
        .replace(/=+$/, '');

const codeVerifier = base64url(crypto.randomBytes(32));
const codeChallenge = base64url(
    crypto.createHash('sha256').update(codeVerifier).digest(),
);

Send code_challenge (with code_challenge_method=S256) on the authorize request in step 1, and keep the code_verifier on your backend (or in secure session storage) to send on the token exchange in step 3.

Security notes

• PKCE (S256) is strongly recommended. It is optional by default; a tenant can require it for your client. Whenever a code_challenge is sent, a matching code_verifier is required at the token endpoint.
• Authorization codes are single-use, expire in 10 minutes, and are bound to the client, the exact redirect_uri, and the PKCE challenge.
• Redirect URIs use exact-match allowlisting — register every URI you intend to use.
• Always send and verify state to protect against CSRF.
• Keep the client_secret and code_verifier on your backend. The only value that legitimately passes through the browser is the authorization code.
• Read the endpoints from a discovery document rather than hard-coding them, so a tenant's move to a custom domain does not break your integration.

Related

• Silent sign-in — Find out whether a visitor is already signed in, without sending them to the sign-in page
• JWT Verification — Token structure, JWKS, and verification examples
• Member Authentication — How Allegro sessions work